US APPROVED 2.450 GHz WIRELESS VIDEO CAMERA WITH 4 CHANNEL RECEIVER RUNS WIRELESS & WIRED AT THE SAME TIME!

The Single Camera System That Has It All. The perfect system for those who do not need a bunch of cameras. A single Night Vision CMOS wireless camera with Infra-Red LEDs that turn on automatically when the light gets too low and shuts off automatically when there is plenty of light for the camera. The 2.4 GHz 4-channel receiver is switchable between 4 channels with the handy switch on the side. It has 2 audio and 2 video outputs. This allows you to hook it up to a monitor and DVR simultaneously. Since there are 4 channels in the receiver, you can run 4 separate cameras (on different broadcast frequencies) and manually switch between them. You can also hook-up wired and wireless cameras at the same time. For example, you could hard wire the camera to your monitor and have the wireless receiver along with the DVR hidden in a locked closet where a burglar could not access it. Includes a camera mount that is a snap to install. This will save lots of time on the initial setup. If you're moving the camera from place to place, you won't have to spend much time mounting it at each new location.

American made Omnivision CMOS chip


The camera in this system can be used with the receiver of any SPYCAM1.