As multi-tools go, the ByrdRench doesn't resemble any other pocket tool on the market. Unlike standard multi-tool fare, it has a full-sized knife blade that opens and closes one handed and locks open like a real pocketknife. It also comes with a pocket clip and nylon sheath so if you like to hang it on a belt loop or clip it in your pocket, you're covered. The tool's housing is two stainless halves that join to create slip joint pliers (with a large or small bite) on one end and an adjustable 9/16" crescent wrench on the opposite end. A set of four screwdriver bits tuck deftly inside, including: a #2 and #3 Phillips-head as well as a #1 and #2 flat-head. The ByrdRench also accepts any standard 1/4" sized bit from your hardware store, including Allen and Torx. A rough file combination hole-starter slides into a spring set in the housing above the bits. A pivot holds the tool's two halves together. When rotated, the pieces extend and lock into a full length, easy to grip torque magnetized screwdriver or crescent wrench. Releasing the pivot separates the screwdriver and knife portion of the tool from the wrench. This allows you to use the crescent wrench and the screwdriver/knife simultaneously or separately. The blade's steel is high performance 8Cr13MoV and it comes in a plain cutting edge.

Closed Length: 4.846"
Overall Length: 7"
Blade Length: 2.5"
Weight: 7.92 ounces
Hole Diameter: .469"
Cutting Edge: 2.5"
Blade Thickness: .078"
Blade Steel: 8Cr13MoV
Handle Material: Stainless Steel
Knife Edge: Plain Edge